 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| New Battery/Battery Indicator |
|
Author: Forum Discussions Views: 9919 Votes: 7 |
|
Can someone refresh my memory on the mod for running a new Gel battery with the sensor port on the 1g .. Is it a 10Kohm resistor to ground in the sensor line ?? Got a email from a old friend who is changed out to a Gel battery and wants the light to go out on the battery indicator ..
Marshall, I think the standard answer is a 2k ohm 1/4 watt resistor. When I did that mod on my '83, however, I had to use a 1k to get the light to go out. The other thing is a 1/8 watt resistor is what I found available at Radio Shack and that is enough for that very low amp circuit.
Last update: 07:46 AM Saturday, January 22, 2005 |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
