 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| Oil Filter Cross Reference |
|
Author: Archives Views: 26678 Votes: 11 |
Oil Filters
The RSV filter thread size is 20mm x 1.5 thread pitch. Gasket O.D. is 2.475" There have been many discussions about using automotive oil filters on motorcycles. Some may work just fine, while others may not. This is a quote from Purolator about using their PureONE oil filters on bikes. QUOTE: If you're thinking you want to install a PureONE oil filter on your bike, please think again. PureONE oil filters are designed for vehicles, not bikes. Because of PureONE's high efficiency, the motorcycle oil pump may not be able to handle the pressure. The Purolator motorcycle filter line is designed to meet the specific needs of a bike; therefore we highly recommend the use of a Purolator ML filter over a PureONE oil filter." In comparing the Purolator M/C filter specs to similar PureONE automotive filters, the difference seems to be the relief valve (also known as bypass valve) pressure ratings. The ML16817 filter relief valve is rated at 9~12 psi. while the automotive filter is rated at 14~18 psi. Just for comparison, the Wix 51358 relief valve pressure is 8 psi, the Fram PH 6017A is 13 psi.
Last update: 02:47 AM Friday, August 31, 2012 |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
