 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| Testing The Pressure Sensor |
|
Author: Neil86 Views: 7075 Votes: 6 |
|
Q: How do you check the function of the pressure sensor to be sure the ignition timing is being advanced? A: First test to see it will hold vacuum. The pressure sensor is prone to developing vacuum leaks. If it will hold vacuum , then to check pressure sensor... with 12 V supply to sensor and atmospheric pressure, the sensor should have ~ 2.0 V output. Application of vacuum or pressure should cause the voltage to vary according to the attached graph. Neil
Last update: 10:13 AM Sunday, September 3, 2006 |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
