 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| Cutting The Windshield |
|
Author: Archives Views: 4429 Votes: 2 |
Cutting The WindshieldI cut mine down by putting masking tape on both sides of the wind screen , maked where I wanted to cut with a felt tip and used a saber saw with a metal cutting blade as you would normally do. After the cut I used a file to smooth out the rough edges then polished it with 400 grit sand paper. Looks good and I can now see over the top......
Last update: 11:19 PM Saturday, September 25, 2004 |
| Related Articles: |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
