 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| Retrieving The Spark Plug |
|
Author: Archives Views: 4968 Votes: 1 |
Retrieving The Spark PlugWhat really helps, once you get the plug loosened, is to use an old Toyota type plug wire to unscrew the plug. We use this trick on cars also for those hard to reach ones. You just plug the end of the spark plug wire on the plug and turn it by hand. (The ones you need are the plug wires used for engines that have the plugs in a "well". They are long and are firm). Makes a huge difference.------------------------ A 10" length of 3/8" ID fuel line works just like a flex drive to slip over the porcelain to take it out after the plug has been broken loose and to start and tread it in going back. And it will fit just fine in your tool pouch. Rick Butler
Last update: 12:01 PM Sunday, September 26, 2004 |
| Related Articles: |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
